AUDIO TECHNICA 4000SERIES
Owner's Manual

Transmitter Controls And Functions
Preset/Default Settings A �PRESET� selection in the menu permits the storing of up to five different user-definable configurations. Customized names, using letters, numbers and symbols, can also be created and stored for Presets 1�5. In addition, a Default (�DEF�) choice permits returning all transmitter functions to their factorydefault settings. To store Preset configurations: 1. Touch the Set button once to move to Menu mode. 2. Touch the Up arrow twice to move to �PRESET� in the LCD window. 3. Touch the Set button once and �LOAD� (or �STORE�) will appear in the LCD. 4. Touch the Up or Down arrow once, if needed, to change the selection to �STORE�. 5. Hold the Set button until �STORE� changes to �PRSET1� (or the name of the currently loaded Preset). 6. If desired, touch the Up or Down arrow to cycle through the available choices: �PRSET1� through �PRSET5� (or their previously changed names). 7. Accept or enter a name for the Preset: a. To accept the standard name (PRSET1 � PRSET5, or the previously stored name) for a new Preset configuration and to update (overwrite) any previously stored configuration choices: a1. At the desired Preset, hold the Set button until the first character blinks. a2. Hold the Set button again until �STORED� appears in the window. This stores the standard Preset name with the associated function choices and returns the transmitter to normal operation. b. To enter a custom name for a Preset: b1. At the desired Preset, hold the Set button until the first character blinks. b2. Using the Up or Down arrow, move through the available characters (see box below) until the desired character is reached. Touch an arrow button for single steps, or hold it down to scroll through the characters at increasing speed. b3. Touch the Set button once to accept the first character and move to the second character, which now is blinking. Use an Up/Down arrow to find the desired second character; touch the Set button once to accept it and move to the third position. Repeat this selection process until the character for the sixth position has been selected. (It is not necessary to change or step through all six characters before storing the result. At any point in the process, simply hold the Set button until �STORED� appears in the window.) b4. Once the sixth character has been selected as desired, hold the Set button until �STORED� appears in the window. This stores the custom Name with the associated function choices and returns the transmitter to normal operation. Note: If a correction or change is desired while entering characters, simply touch the Set button once when the sixth (last) character has been reached. The window will flash �ESCAPE.� Touching the Set button once more will start the name-entry process over at the first character. (To leave any characters as they are, simply touch the Set button once to skip over them.)

(Continued)

Available transmitter Name character choices (listed in the Up-arrow direction): A �through� Z, __ (underscore) � (space),

[ (left bracket) � ] (right bracket), * � + � -- � /, 0 �through� 9, |�<�>�? To load (recall) a Preset: 1. Touch the Set button once to move to Menu mode. (The window changes to frequency, if Name had been displayed.) 2. Touch the Up arrow twice to move to �PRESET� in the LCD window. 3. Touch the Set button once. �LOAD� (or �STORE�) appears in the LCD. 4. If needed, touch the Up or Down arrow once, to change the selection to �LOAD.� 5. Hold the Set button until �LOAD xxxxxx� (the current Preset) appears in the LCD. 6. Touch the Up or Down arrow to change the selection from �xxxxxx� to the desired Preset. 7. Hold the Set button until �LOADED� appears briefly in the LCD. The transmitter reverts to normal operation with the selected preset�s settings loaded. To toggle between transmitter name and frequency, touch an Up or Down arrow button. To revert to factory-default values: 1. Touch the Set button once to move to Menu mode. 2. Touch the Up arrow twice. �PRESET� shows in the LCD window. 3. Touch the Set button once. �LOAD� (or �STORE�) appears in the LCD. 4. Touch the Up or Down arrow once, if needed, to change the selection to �LOAD.� 5. Hold the Set button. The current Preset appears in the LCD. 6. Touch the Up or Down arrow buttons to cycle through the available choices until �DEF� appears in the display. 7. Hold the Set button to load the factory default settings. �LOADED� appears briefly in the LCD. The transmitter reverts to normal operation at the default settings. Note: Loading the default settings resets the transmitter frequency to the default value of 541.500 (Band C) or 655.500 (Band D).

20